- Nickel Metal Hydride batteries
- 7AA x 2100mA Hr. with digital temp sensor.
- 3.78" x 3.50" x 0.592" (L x W x H).
- Temperature range: 0 to +40°C
The BAT104-NiMh creates a complete UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. The BAT104-NiMh includes seven 2300ma-hr NiMh batteries for a total of 19.3 watt-hours of power. Therefore a BAT104-NiMh can supply backup power for up to sixty minutes to a 19.3 watt load.
The BAT104-NiMh includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT104-NiMh from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V). The BAT104-NiMh has both a thermal fuse and a current fuse for protection against overcharging, and shorts on the battery output. A digital I2C temperature sensor provides temperature feedback for charge termination, which can be read by the HESC.
Note that all this board is supplied with no memory or cables.
This is the non stack-through version - meaning the PC/104 connectors are non stackthrough (i.e. you can't plug a PC/104 card on the underside of this card).
|
