|
64GB Solid State 2.5" SATA Disk Drive
- 64GB SATA drive
- 0°C to +70°C temp range
- Completely solid state
- 9.5mm height
- SLC NAND flash memory
- Max read speed: 250MB/sec
- Max write speed: 200MB/sec
- Indilinx controller - 1819 firmware with 'garbage collection' (Win 7 trim/wiper supported)
- Max IOPS: 8,000/6,000 (Read/Write)
- 2,000,000 Hours MTBF
- Standard SATA data/power connectors
- 3 year warranty
- Appears as a standard hard-disk
Solidata K5 series SSDs are state-of-the-art storage drives and are designed expressly for notebook computers, desktop computers and embedded systems. With read speeds up to 250MB/sec and capacities up to 128GB, the Solidata K5 series SSDs are suitable for applications that require high transfer speeds and extremely high transaction rates (IOPS).
To upgrade of your HDD with a new SSD is easy since they are 100% compatible. The K series SSDs are affordable and rewarding. All the K series drives are specially designed for Linux OS,Unix OS and as system disks for Windows OS.
This is the 64GB, SATA, SLC, K5, 2.5" version.
SLC V MLC Flash
SLC (Single-Level Cell) and MLC (Multi-Level Cell) are both NAND-based non-volatile memory technologies. MLC allows each storage cell to store 2 bits of information whilst SLC only allows 1. This means that MLC drives have one main advantage - compared to a similar SLC drive they will be cheaper due to the fewer flash devices needed (i.e. lower flash density).
SLC NAND flash is superior in a number of ways. It provides an enhanced level of performance in the form of faster read/write speeds. Due to the fact that SLC stores only one bit per cell, the chances or errors are greatly reduced. MLC flash requires 4 bit ECC whereas SLC only requires 2 bit ECC.
Detailed Specifications
| Host Interface |
Interface |
SATA2 Standard (300MB/s) |
| Transfer Mode |
PIO mode (0 - 4), DMA mode (0 - 2), Ultra DMA mode (0 - 6) |
| |
Connector |
Standard SATA (4 pin data, 7 pin power) |
| Capacity (GB) |
16, 32, 64, 128 GB (Gigabyte) |
| Form Factor |
2.5" (100mm x 70mm x 9.5mm) |
| Controller |
Indilinx (1819 firmware) |
| Flash Type |
SLC (Single Layer Cell) Samsung NAND flash |
| Performance |
Average Access Time* |
0.1 msec |
| Sustained Read** |
250 MB/sec |
| Sustained Write** |
200MB/sec |
| IOPS |
8000 read, 6000 write (both at 4kB packet size) |
| Power |
Input Voltage |
5V +/- 5% |
| Power Consumption |
Measurements with 32GB drive, power consumption:
Idle: 0.5W
Active: 2W
Standby/sleep: 0.3W |
| Endurance |
S.M.A.R.T Support |
Yes |
| MTBF |
2,000,000 Hours |
| Vibration |
20G Peak, 10 ~ 2000Hz, (15mins/ Axis) x3 Axis |
| Shock |
1500G, ( @ 0.5msec half sine wave ) |
| Environment |
Temperature |
0 to 70°C operating
-55°C to 95°C storage
|
| Humidity |
0°C to 55°C / 90~95% RH |
|
