|
Opal-MM-1616 is a PC/104 format digital I/O module designed for industrial applications requiring isolation between the computer and the external signals it is monitoring and controlling.
The Opal-MM-1616 features 16 optoisolated digital inputs and 16 relay outputs. Each input has an input range of 0-30VDC. Opal-MM-1616 can be configured to generate an interrupt when any input changes state. Either or both banks of 8 inputs can be configured for interrupt operation. One 34-pin I/O header is used for the optoisolated inputs.
The 16 relay outputs are SPDT format (form C). Each relay has 3 contacts: Common, Normally Open, and Normally Closed. For safety and reliability, all relays are at their power-off state at power-up or system reset. Each relay can switch both AC and DC voltages. Two 26-pin I/O headers are used for the relay outputs with 8 relays on each pin header. The relays have long lifetime (10,000,000 operations) and quick actuation time (5ms max operate and release, break before make).
Diamond Systems' Universal Driver software provides drivers and example code for use with the Opal-MM-1616. The software provides support for interrupts and enables you to integrate you own code that is called when an interrupt occurs.
Key Features
- 16 unidirectional optoisolated digital inputs with 0-30VDC input
- 16 Form C SPDT relay outputs
- 2A relay switching capacity
- Relays can switch both DC and AC voltages
- Long lifetime relays (10,000,000 operations)
- 500VDC isolation between board and signals
- +5VDC power input
- PC/104 form factor
- Supported by Diamond's Universal Driver
- -40°C to +85°C operating temperature
- +5V board operation
- ROHS compliant
This board has a single 40 pin connector - DSC cable is C-40-18.
This board is just one of a range of high quality analog and digital I/O boards from Diamond Systems - refer to our main website for other boards in their range.
|
