|
JANUS-MM combines dual CAN bus interfaces with sockets for wireless communications and GPS to create a complete I/O subsystem for automotive and vehicle tracking applications. The dual CANbus ports use the Philips SJA1000T CAN controller and 82C251 transceiver, for full CAN2.0B functionality. Each port is independently isolated from the system to eliminate sensitivity to noise and ground shifts in the network. Jumper options include slew rate control, transceiver power source (on-board or loop power), address, and interrupt settings. Both memory and I/O addressing are supported. For ruggedized applications, 0Ω jumper-bypass resistors can be installed in any configuration.
Key Features
- 2-in-1 CANBus + Wireless/GPS board
- Dual CAN 2.0B interface
- Philips SJA1000T controllers
- Linux CAN driver included
- Windows CE.NET CAN driver option
- Socket for GSM/GPRS and CDMA
- Socket for GPS receiver module
- PC/104 form factor
- +5V only power supply
- -40 to +85°C operation
- ROHS compliant
Note that this is the JNMM-GPS-IQ variant - this is the carrier board with the Lassen iQ fitted.
This board is just one of a range of high quality serial, analog and digital I/O boards from Diamond Systems - refer to our main website for other boards in their range.
|
