|
This adapter allows developers to mount a Mini PCI card, such as an IEEE 802.11 wireless LAN card, into a standard 3.3 or 5V PC/104-Plus stack.
Equipped with a passive PC/104 stack-through connector, the card can be installed in a PC/104-Plus stack without interfering with the signals of PC/104 cards located above or below.
Simply insert the Mini PCI card into socket on the card and insert into the host system's PC/104-Plus stack. Each card within the stack must have a unique ID ranging from zero to three. You will be required to set a pair of jumpers to specify where your card is located within the stack. (Ensure that no two boards share an ID number).
The jumpers remain unpopulated for an ID of zero. Populate the left jumper for an ID of one, right jumper for an ID of two, and populate both for an ID of three.
Key Features
- Compatible with standard Universal, 3.3V or 5V PC/104-Plus stack
- Industrial temperature operating range (-40°C to 85°C)
- Mini PCI Type III 124 pin female socket
- PC/104-Plus 120 pin stack-through connector
- PC/104 64 and 40 pin passive stack-through connectors
- 3.3V regulator capable of delivering 2 Watts of power to the Mini PCI card
- Measures 3.55" by 3.775" (standard PC/104 size)
- RoHS Compliant
Note that all this board is supplied with no memory or cables
This board is just one of a range of high quality serial and I/O boards from Connect Tech- refer to our main website for other boards in their range.
|
